JINHAN SMTO502S 60MHz 250MSa/s Sampling Rate Touch Screen Oscilloscope USB Oscilloscopes 2Channel+ Signal Generator

Specification:

SMTO502S
Main function	Dual channel oscilloscope + single channel signal generator
Language	Chinese, English, Russian, Portuguese, Spanish
Number of channels	Dual channel
Sampling rate	250MSa / S for single channel and 500msa / S for double channel
Bandwidth	60M
Storage depth	32K per channel
Vertical resolution	8bit
Vertical gear	In case of probe x1, 10mv-5v (1, 2.5, 5 step) maximum measured voltage X1 (40V) x10 (400V) high voltage probe is used, and the maximum voltage is determined by the probe quality
Horizontal gear	5s- 10ns (5S - 100ms scan mode)
Impedance	1MΩ 25pF
Coupling	DC, AC
Display mode	YT mode + XY mode (Li Shayu mode)
Measurement	13 kinds (frequency, period, amplitude, maximum, minimum, average, RMS, duty cycle positive, duty cycle negative, positive pulse width, negative pulse width, rise time, fall time)
Input voltage	X1 MAX 300V
Trigger mode	Automatic, normal and single
Trigger type	Rising edge, falling edge
Automatic detection	50Hz - 30MHz
Cursor measurement	Cursor measurement is supported both vertically and horizontally
Calculation	CH1+CH2,CH1-CH2,CH2-CH1
Waveform recording	32 groups (recording waveform supports zooming in and out to view details)
Screenshot function	Support
Self calibration	Support
Screenshot	Support U-disk screenshots (image format JPG)
Display	7 inch capacitive touch screen
Battery	5000mA large capacity lithium ion battery (it can be used for more than 6 hours when fully charged)
Charger	Maximum support of 5V 2.1a DC charging (real time light response to charging state)

Signal generator
Range	0 V - 8V (minimum resolution 10 MV)
Deviation	0V-(+ - 4V) (MAX + - 4V) (min resolution 10mV)
Duty cycle	0% - 100% (1% minimum resolution)
Sine wave	0.01Hz - 30MHz (minimum resolution 1 / 1000)
Square wave	0.01Hz - 10MHz (minimum resolution 1 / 1000)
Other waveforms(triangular wave, sawtooth wave, ringing wave)	0.01Hz - 1MHz (minimum resolution 1 / 1000)

Package includes:

1 x Host

2 x P6100 100M probe

1 x Signal source output line

1 x Bracket

1 x Power adapter (5V 1A) (optional for European and American standards)

1 x Data line (Type-C)

1 x Manual (U disk)

Details picture: